RT Journal Article
T1 Analysis of contact forces between the pantograph and the overhead conductor rail using a validated finite element model
A1 Simarro-Vega, Montserrat
A1 Postigo-Pozo, Sergio
A1 Prado-Novoa, María
A1 Pérez-de-la-Blanca-Cobos, Ana María
A1 Castillo-Aguilar, Juan Jesús
K1 Pantógrafo
K1 Carril conductor aéreo
AB This work presents the study of the interaction between 11 models of pantographs and 2 models of overhead conductor rails (OCR). All the models have been analysed at speeds of 70, 100 and 130 km/h. Furthermore, one of the OCR models used to carry out this study has been previously validated with experimental modal tests. The contact forces between each pantograph and catenary model is obtained in all cases. The analysis of the results reveals the contact forces are influenced by the dispersion in the length of the spans of the OCR sections and the pantograph model for speeds above 100 km/h. Thus, if pantograph resonance is not present, the lower the dispersion, the more constant the forces are. On the contrary, span length variations and the pantograph model have little influence on contact forces at low speeds. In addition, contact forces increase in the transitions between two sections of the overhead conductor rail. This phenomenom becomes more noticeable as the speed of pantograph operation increases.
PB Elsevier
YR 2020
FD 2020
LK https://hdl.handle.net/10630/35374
UL https://hdl.handle.net/10630/35374
LA eng
NO Montserrat Simarro, S. Postigo, Maria Prado-Novoa, A. Pérez-Blanca, Juan J. Castillo, Analysis of contact forces between the pantograph and the overhead conductor rail using a validated finite element model, Engineering Structures, Volume 225, 2020, 111265, ISSN 0141-0296, https://doi.org/10.1016/j.engstruct.2020.111265
DS RIUMA. Repositorio Institucional de la Universidad de Málaga
RD 19 ene 2026