RT Conference Proceedings
T1 One step synthesis of nanocomposite electrodes for reversible electrochemical cells.
A1 Dos-Santos-Gómez, Lucía
A1 Zamudio-García, Javier
A1 Caizán-Juanarena, Leire
A1 Porras-Vázquez, José Manuel
A1 Ramírez-Losilla, Enrique
A1 Marrero-López, David
K1 Pilas de combustible
K1 Recursos energéticos renovables
K1 Materiales nanocompuestos
AB The irregular and seasonal disposition of renewable energy requires advanced devices for energy storage and conversion. Reversible electrochemical cells can address this approach by operating as both electrolyzer and fuel cell in an efficient and eco-friendly way. An important issue for increasing the performance of ceramic electrochemical cells is the sluggish oxygen reduction reaction kinetic at the air electrode [1]. It is well known that the efficiency of air electrodes may be improved by adding a second phase with high ionic conductivity, i.e. doped-CeO2 and Bi2O3, to obtain a composite electrode.[1] Moreover, they are usually employed to reduce the mechanical stress between electrode and electrolyte layers, originated by their different thermal expansion coefficients, thus enhancing the mechanical stability of the cell. Traditionally, composite electrodes are prepared by mechanically mixing pristine materials but, unfortunately, it is difficult to control the composition distribution and architecture with this method. In this work, different nanocomposite electrodes are successfully prepared by using both the freeze-drying powder precursor method and the spray-pyrolysis deposition, in a single-step synthesis, from precursor solutions containing all cations in stoichiometric amounts. For instance, La0.8Sr0.2MnO3-δ-Ce0.9Gd0.1O1.95 (LSM-CGO), La0.6Sr0.4Co0.2Fe0.8O3-δ-Ce0.9Gd0.1O1.95 (LSCF-CGO) and Sm0.5Sr0.5CoO3-δ-Ce0.9Sm0.1O1.95 (SSC-CSO). Both fluorite and perovskite-based phases are formed simultaneously, reducing drastically the preparation time, which is crucial for potential industrial application. The electrodes are composed of nanometric particles, providing high active area for electrochemical reactions. The intimate mixture of two immiscible phases hinder the cation diffusion and the grain growth rate. Very low polarization resistance values are obtained, i.e. 0.088 Ω cm2 at 700 °C for SSC-CSO.
YR 2023
FD 2023
LK https://hdl.handle.net/10630/27184
UL https://hdl.handle.net/10630/27184
LA eng
NO Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.
DS RIUMA. Repositorio Institucional de la Universidad de Málaga
RD 24 ene 2026