RT Conference Proceedings
T1 Influence of the calcium sulfate source on the rheological behaviour of calcium sulfoaluminate cement pastes
A1 Santacruz-Cruz, María Isabel
A1 García-Maté, Marta
A1 García-Aranda, Miguel Ángel
A1 Gómez-de-la-Torre, María de los  Ángeles
K1 Reología
K1 Cemento
AB Calcium sulfoaluminate (CSA) cements are receiving increasing attention since their manufacture produces much less CO2 than ordinary Portland cement (OPC) [1]. In addition, they show interesting properties such as high early-age strengths, short setting times and impermeability. The main uses of these CSA cements are for quick repairs and pre-cast products or floor concrete applications. They are prepared by mixing the clinker with different amounts of a calcium sulfate set regulator such as gypsum, bassanite or natural anhydrite, or mixtures of them. This work studies the effect of the amount and type of calcium sulfate (gypsum, anhydrite and bassanite) added to a commercial CSA clinker on the rheological behaviour of fresh cement pastes, setting time, phase assemblage, and hence, compressive strength of the corresponding mortars. This study demonstrated that the rheological behaviour is not affected by the addition of different gypsum contents, but the addition of bassanite increases the viscosity of fresh pastes, and considerably reduces the setting time. All the chemistry evolved in these pastes affect the compressive strengths of the corresponding mortars. Finally, mortars prepared from CSA cements with 25 wt% of anhydrite showed a compressive strength of 64.1 ± 0.6 MPa just after 3 hydration days.
YR 2013
FD 2013-09-13
LK http://hdl.handle.net/10630/5711
UL http://hdl.handle.net/10630/5711
LA eng
NO Presentación de trabajo en un congreso en Andalucía
DS RIUMA. Repositorio Institucional de la Universidad de Málaga
RD 21 ene 2026