2026-05-30T17:06:36Zhttps://riuma.uma.es/rest/oai/request

oai:riuma.uma.es:10630/180292026-02-03T12:08:01Zcom_10630_2254col_10630_37959

Santacruz-Cruz, María Isabel Zea-Garcia, Jesus D. Londono-Zuluaga, Diana Cuesta-García, Ana María García-Aranda, Miguel Ángel Gómez-de-la-Torre, María de los Ángeles 2019-07-12T09:17:14Z 2019-07-12T09:17:14Z 2019 https://hdl.handle.net/10630/18029 Portland Cement (PC) is the most important active ingredient in most of the construction concrete. However, the PC production is associated with a high carbon dioxide release (around 1 ton of CO2 per ton of PC). One approach to reduce CO2 emissions consists on the reformulation of the clinker with less calcite demanding phases, such as, belite rich clinkers. The drawback of this kind of clinkers is the low reactivity of belite (beta-belite). In order to compensate this problem, belite rich clinkers can be prepared with ye’elimite and ferrite or with alite [known as belite-ye’elimite-ferrite (BYF) and belite-alite-ye’elimite (BAY), respectively]. In addition, it can be improved by using a high reactive belite polymorph, such as alpha-belite. In this work, the hydration and mechanical behaviour of BYF and BAY cements (with beta and/or alpha-belite) with different water-to-cement ratios have been studied. The clinkers were produced using natural raw materials, and were mixed with anhydrite (CaSO4) to prepare the corresponding cements. At early ages, the main hydration products of these cements were ettringite, calcium monosulfoaluminate and amorphous aluminium hydroxide. At later ages, stratlingite, katoite and amorphous C-S-H were found. The compressive strength values of the corresponding mortars were correlated with the mineralogy evolution of the pastes (mainly obtained by XRD and TGA). eng http://creativecommons.org/licenses/by-nc-nd/4.0/ open access Attribution-NonCommercial-NoDerivatives 4.0 Internacional Attribution-NonCommercial-NoDerivatives 4.0 Internacional Water-to-cement ratio influence on low-carbon cements performances conference output