2026-05-31T02:46:21Zhttps://riuma.uma.es/rest/oai/request

oai:riuma.uma.es:10630/185122026-02-03T12:23:08Zcom_10630_2254col_10630_37959

00925njm 22002777a 4500 dc Fúnez Núñez, Inmaculada author García-Sancho, Cristina author Cecilia-Buenestado, Juan Antonio author Moreno-Tost, Ramón author Serrano Cantador, Luis author Maireles-Torres, Pedro Jesús author 2019-10-03 Furfural is considered as one of the 12 platform molecules derived from biomass for the synthesis of high value-added chemicals. It is mainly produced by acid-catalyzed dehydration ofpentoses, such as xylose, which can be obtained from hemicellulose, one of the main components of lignocellulosic biomass. The aim of this work was to obtain furfural from lignocellulosic wastes from the agro-food industry, such as olive stones. For this purpose, the catalytic behavior of a mesoporous g-Al2O3 as acid solid catalyst and the effect of the addition of CaCl2 in order to improve the furfural yield were evaluated. Firstly, the production of sugar-rich liquors from olive stones was optimized in a thermostated 2 L reactor under continuous stirring, by using water as solvent with a solid:liquid mass ratio of 1:10, at 160-200 °C for 30-75 minutes. The liquors H7 and H10 obtained at 180 °C and 60 minutes and 190 °C and 45 minutes, respectively, showed the highest xylose contents and they were chosen for furfural production. The catalytic dehydration of pentoses-containing liquors, mainly D-xylose, was studied in batch type glass reactors in a thermostated aluminum block under magnetic stirring, at 150 °C for 50 minutes. In a typical test, 1.5 mL of liquor, 3.5 mL of toluene, 50 mg of g-Al2O3 and 0.65 g CaCl2·g.sol -1 were added to the reaction medium. The reaction products were analyzed by HPLC. The presence of the catalyst, g- Al2O3, hardly improves the performance of furfural with respect to the non-catalytic process . However, an increase in furfural yield is observed in the presence of CaCl2, being maximum when g-Al2O3 and CaCl2 are used together (100% and 74% for H7 and H10, respectively). The lower yield attained from H10 could be due to the use of a higher temperature to obtain this liquor, since the formation of degradation products, such as formic acid, acetic acid and HMF, could promote secondary reactions of furfural, consequently decreasing the furfural yield. https://hdl.handle.net/10630/18512 Biomasa vegetal Residuos agrícolas Olivos Valorization of olive stones to obtain furfural in the presence of gamma-Al2O3 and CaCl2