2026-05-30T01:53:11Zhttps://riuma.uma.es/rest/oai/request

oai:riuma.uma.es:10630/387572026-02-03T11:02:02Zcom_10630_2254col_10630_37953

00925njm 22002777a 4500 dc Abatta-Jacome, Lenin author Caminos-Gámez, Luis Francisco author González-Herrera, Antonio author García-Manrique-Ocaña, José Manuel author 2024-09-24 This study presents a detailed analysis of a fatigue test campaign in order to identify different crack patterns. It was conducted on 6061-T6 aluminum tubular specimens featuring an internal diameter of 10mmand different thicknesses (2, 3 and 4 mm). These specimens were subjected to cyclic tensile loads with a load ratio of R = 0.1, utilizing a sinusoidal load function at a frequency of 3 Hz. The investigation examines the crack growth rates, the stress intensity factor, and the final and intermediate fracture zones by applying overloads in some cases. The differences with two-dimensional specimens and the importance of this study for the interpretation of results with biaxial loading states are highlighted. The different states of crack growth detected are analyzed using artificial vision techniques. The differences between the exterior and interior faces of the specimen are revealed, and a series of states prior to the formation of the radial crack front expected in these specimens are identified. Abatta-Jacome, L.; Caminos, L.; Gonzalez-Herrera, A.; Garcia-Manrique, J.M. Crack Growth Patterns of Aluminum Tubular Specimens Subjected to Cyclic Tensile Loads. Metals 2024, 14, 1094. https://doi.org/10.3390/met14101094 https://hdl.handle.net/10630/38757 10.3390/met14101094 Materiales - Fatiga Aluminio Crack Growth Patterns of Aluminum Tubular Specimens Subjected to Cyclic Tensile Loads