2026-05-30T03:31:23Zhttps://riuma.uma.es/rest/oai/request

oai:riuma.uma.es:10630/456012026-02-21T00:47:48Zcom_10630_2254col_10630_37953

00925njm 22002777a 4500 dc Sánchez-Amaya, José Maria author Delgado-Pérez, Tomás author González-Rovira, L. author Botana, F.J. author 2009 In this work, samples of aluminium alloys 5083-T0 and 6082-T6 have been welded under conduction regime, using a high power diode laser. The influence of experimental variables, as the laser power and the linear welding rate, on the sizes and properties of the butt weld beads has been studied. In addition to measure the depths and widths of the weld beads, their microstructure, microhardness profile and corrosion resistance have been analysed. The results obtained allow one to define the experimental conditions leading to good quality butt welds with higher penetration than those published in the recent literature under conduction regime. Maximum penetration values of 3 and 2.3 mm were obtained for 5083 and 6082, respectively. Additionally, a simple mathematical expression relating the weld depth (d) with the laser power (P) and the processing rate (v) has been proposed: d = (P - bb)/ (av) - (ba)/a, beinga, a0, b and b0 constant values for each alloy and under the employed experimental conditions. The values of these coefficients have been estimated from the fitting to the experimental depth values of 5083 and 6082 butt welds generated under conduction regime. J.M. Sánchez-Amaya, T. Delgado, L. González-Rovira, F.J. Botana. Appl. Surf. Sci., 255 (2009), pp. 9512-9521 https://hdl.handle.net/10630/45601 10.1016/j.apsusc.2009.07.081 Fusión con laser Soldeo - Defectos Laser welding of aluminium alloys 5083 and 6082 under conduction regime