Synchrotron characterization techniques [1] are being used to study Portland-based cements and recently also CSA and related cements. A key property of these techniques is that they do not require sample preparation, so ...

The manufacturing of ye'elimite-rich cements releases from 15 to 37%, depending on their composition, less CO2 to the atmosphere than ordinary Portland cement (OPC). BYF cements containing belite, ye’elimite and ferrite ...

The manufacture of CSA cements is more environmentally friendly than that of OPC as it releases less CO2. This reduction depends on CSA composition and is due to three factors: i) less emissions from decarbonation in the ...

Cement matrices contain large amounts of crystalline phases jointly with amorphous and/or nanocrystalline phases. Consequently, their analyses are very challenging. Synchrotron powder diffraction in combination with the ...

The main aim of this study is to apply synchrotron radiation techniques for the study of hydrated cement pastes. In particular, the tetracalcium aluminoferrite phase, C4AF in cement nomenclature, is the major iron-containing ...

There are many commercially important multiphase materials which contain amorphous phases, such as cement pastes, porcelains, glass-ceramics or pharmaceutical compounds. However, the analysis of amorphous phase(s) within ...

External standard methodology has been successfully applied to quantify the known amounts of amorphous component that are increasingly added to cement-related materials. The consistency and accuracy of the methodology were ...

The analysis of amorphous/nanocrystalline phase(s) within cement matrices that contain high amounts of crystalline phase(s) is very challenging. Synchrotron techniques can be very useful to characterize such complex samples.1 ...

Ptychographic X-ray computed tomography provides 3D electron mass density and attenuationcoefficient distributions of unaltered cement pastes with an isotropic resolution below 100 nm. Thisimaging technique allows ...

The identification and quantification of amorphous components and nanocrystalline phases with very small crystal sizes, smaller than ~3 nm, within samples containing crystalline phases is very challenging. However, this ...