Synchrotron characterization techniques [1] are being used to study Portland-based cements and recently also CSA and related cements. A key property of these techniques is that they do not require sample preparation, so ...

The manufacturing of ye'elimite-rich cements releases from 15 to 37%, depending on their composition, less CO2 to the atmosphere than ordinary Portland cement (OPC). BYF cements containing belite, ye’elimite and ferrite ...

The manufacture of CSA cements is more environmentally friendly than that of OPC as it releases less CO2. This reduction depends on CSA composition and is due to three factors: i) less emissions from decarbonation in the ...

Portland cements are currently used as Oil‐Well‐Cements for the sheath between the metal casing and the borehole. At high pressures and temperatures, the resulting C-S-H gel(s) is partly unstable and it can react to give ...

Cement matrices contain large amounts of crystalline phases jointly with amorphous and/or nanocrystalline phases. Consequently, their analyses are very challenging. Synchrotron powder diffraction in combination with the ...

Belite sulfoaluminate (BSA) cements have been proposed as environmentally friendly building materials, as their production may release up to 35% less CO2 into the atmosphere when compared to ordinary Portland cements. ...

There are many commercially important multiphase materials which contain amorphous phases, such as cement pastes, porcelains, glass-ceramics or pharmaceutical compounds. However, the analysis of amorphous phase(s) within ...

One alternative to decrease CO2 emissions from ordinary Portland Cement (OPC) production consists on the development of a new kind of eco-cements composed by less calcite demanding phases. That is the case of ...

The durability of cement-based construction materials depends on the environmental conditions during their service life. A further factor is the microstructure of the cement bulk, established by formation of cement hydrates. ...

Ptychographic X-ray computed tomography provides 3D electron mass density and attenuationcoefficient distributions of unaltered cement pastes with an isotropic resolution below 100 nm. Thisimaging technique allows ...