In this work, four BACSA clinkers with different compositions (belite ~ 70-55 wt %, alite ~ 10-15 wt % and ye’elimite ~ 10-15 wt %) were synthesized (at laboratory scale). Lime, gypsum, kaolin and sand were used as raw ...

Some belite-ye´elimite-ferrite (BYF) cements present low mechanical strengths mainly due to the slow reactivity of belite. A solution to this problem may be the activation of BYF clinkers by preparing them with a coexistence ...

A cement powder, composed of belite, alite and ye’elimite, was blended with 0, 15 and 30 wt% of fly ash and the resulting lended cements were further characterized. During hydration, the presence of fly ash caused the ...

Belite Calcium SulfoAluminate (BCSA) eco-cements were developed as OPC substitutes since in their production release 22% less CO2 than OPC. BCSA eco-cements contain belite as main phase (>50 wt%) and ye'elimite as secondary ...

The analysis of nanocrystalline and amorphous components within cement pastes that contain high amounts of crystalline phases is very challenging. Synchrotron powder diffraction jointly with the pair distribution function ...

The manufacture of Calcium SulfoAluminate (CSA) cements is more environmentally friendly than that of OPC [1] as their production releases up to 40% less CO2 than the latter. The main performances of CSA cements are fast ...

The availability of cements, including eco-cements, with tailored mechanical properties is very important for special applications in the building industry. Here we report a full study of the hydration of calcium sulfoaluminate ...

Belite-Ye’elimite-Ferrite cements, BYF, are a sustainable alternative to OPC to reduce CO2 emissions. The aim of this research is to understand the influence of the sulfate source on the hydration of two laboratory-prepared ...

Cement based binders are building materials of worldwide importance. Since these samples are very complex, the knowledge/control of their mineralogical composition are essential to design and predict materials with ...