Buscar
Mostrando ítems 41-50 de 88
Rietveld quantitative phase analysis with molybdenum radiation
(Cambridge Core, 2014)
Building materials are very complex samples of worldwide importance; hence quantitative knowledge
of their mineralogical composition is necessary to predict performances. Rietveld quantitative phase
analysis (RQPA) allows ...
Rheological and hydration characterization of calcium sulfoaluminate cement pastes
(2015-05-14)
Calcium sulfoaluminate (CSA) cements are currently receiving a lot of attention because their manufacture produces less CO2 than ordinary Portland cement (OPC). However, it is essential to
understand all parameters which ...
Hydration of C4AF in the presence of other phases: A synchrotron X-ray powder diffraction study
(Elsevier, 2015)
Hydration behaviour of C4AF in selected experimental conditions has been determined. C4AF has been
hydrated in the absence and presence of gypsum, two polymorphs of ye’elimite and different water/solid
ratios. C4AF in ...
Water-to-cement ratio influence on low-carbon cements performances
(2019)
Portland Cement (PC) is the most important active ingredient in most of the construction concrete. However, the PC production is associated with a high carbon dioxide release (around 1 ton of CO2 per ton of PC). One approach ...
Combined use of laboratory X-ray diffraction and microtomography in early age cement hydration.
(2023)
In situ laboratory X-ray powder diffraction (LXRPD) is widely used for studying cement hydration at
early ages. However, this approach has limitations due to the intrinsic characteristics of the main
methodologies (flat ...
Activation of LC3 binders by C-S-H nucleation seeding with a new tailored admixture for low-carbon cements.
(2023)
The use of supplementary cementitious materials is currently the most favorable
strategy for reducing CO2 emissions in cements. Limestone Calcined Clay Cements,
LC3, are a type of cement that allows the reduction of CO2 ...
ANALYSIS OF BUILDING MATERIALS BY SYNCHROTRON X-RAY IMAGING
(-, 2021-01)
Building materials have complex hierarchical microstructures. The largest components are coarse aggregates with dimensions larger than a few centimetres and the smallest ones are the calcium silicate hydrate (C-S-H) gel ...
Belite calcium sulfoaluminate cement early hydration: citric acid sensitivity.
(2023)
Three buckets, corresponding to three selected samples, of the same type of belite calcium sulfoaluminate (BCSA) cements have been studied. These cements show very similar elemental and mineralogical compositions, and ...
Activation of LC3 low-carbon cements by C-S-H seeding.
(2023)
Portland-based Limestone Calcined Clay Cements (LC3) are attracting a lot of the attention from scholars
and field applications due to the reduction in CO2 emissions. However, their low mechanical strengths at
early ages ...
Effect of alkanolamines in kaolinitic calcined clays pozzolanic reactivity.
(2023)
Five kaolinitic clays with different amounts of kaolinite, ranging between ~70 wt% and ~30 wt%, have
been studied to unravel the possible activation effect of alkanolamines on the aluminate fraction of
calcined clays. ...