Buscar
Mostrando ítems 41-50 de 106
Local structure and Ca/Si ratio in C-S-H gels from hydration of blends of tricalcium silicate and silica fume
(Elsevier, 2021-03)
At the microscale, C-S-H gels from alite, or neat Portland cements, has a Ca/Si ratio close to 1.80. At the nanoscale, C-S-H is described by a defective tobermorite structure which allows a maximum Ca/Si ratio close to ...
C-S-H seeding activation of Portland and Belite cements: An enlightening in situ synchrotron powder diffraction study
(Elsevier, 2022-11)
C-S-H seeding in Portland cements is well known from basic scientific works and field applications. Moreover, this activation approach could be beneficial for low-CO2 cements under development where a general drawback is ...
Portland and Belite Cement Hydration Acceleration by C-S-H Seeds with Variable w/c Ratios
(IOAP-MPDI, 2002-05-16)
The acceleration of very early age cement hydration by C-S-H seeding is getting attention from scholars and field applications because the enhanced early age features do not compromise later age performances. This acceleration ...
Hydration Activation of Alite-Belite-Ye’elimite Cements by Doping with Boron
(2020)
The hydration behavior of two alite-belite-ye’elimite (ABY)
cements has been studied. The production of these materials releases into
atmosphere ∼17% less CO2 compared to Portland cement. The ABY cement
contains alite, ...
Early hydration study of standard and doped Alite-Belite-Ye’elimite (ABY) cements through Synchrotron Radiation
(2018-07-09)
The manufacturing of ye'elimite-rich cements releases from 15 to 37%, depending on their
composition, less CO2 to the atmosphere than ordinary Portland cement (OPC). BYF cements
containing belite, ye’elimite and ferrite ...
Early hydration of belite-ye’elimite-ferrite cements: Role of admixtures
(sciencedirect, 2023)
The effect of TIPA and CaCl2 on early hydration, i.e. 24 h, of a B-BYF cement has been studied by in situ synchrotron X-ray powder diffraction, calorimetry, thermal analysis, NMR, and rheological measurements of the pastes ...
Recent Advances in C-S-H Nucleation Seeding for Improving Cement Performances
(MDPI, 2023)
Reducing cement CO2 footprint is a societal need. This is being achieved mainly by replacing
an increasing amount of Portland clinker by supplementary cementitious materials. However,
this comes at a price: lower mechanical ...
Alite-belite-ye'elimite cements: Effect of dopants on the clinker phase composition and properties
(2018-10-30)
Clinkers with alite-belite-ye'elimite (ABY) are considered as eco-friendly cements. Clinkering (2 Kg) of two types of ABY clinkers was optimized: standard-ABY, with CaF2 and ZnO as dopants (32.6 wt% alite, 30.4 wt% β-C2S ...
Influence of fly ash blending on hydration and physical behavior of Belite-Alite-Ye'elimite cements
(2018-10-19)
A cement powder, composed of belite, alite and ye’elimite, was blended with 0, 15 and 30 wt% of fly ash and the resulting lended cements were further characterized. During hydration, the presence of fly ash caused the ...
Processing and characterisation of standard and doped alite-belite-ye'elimite ecocement pastes and mortars
(2020-02-26)
Here, we report the processing optimisation of two laboratory-prepared alite-belite-ye'elimite ecocements (standard and doped) that release to the atmosphere ~13% less CO2 than Portland Cement during fabrication. The ...