ICMF - Artículos
Envíos recientes
-
Ann-based predictive model of geometrical deviations in dry turning of AA7075 (Al-Zn) alloy
Trujillo-Vilches, Francisco Javier
; Martín-Béjar, Sergio; Bañón-García, Fermín; Andersson, Tobias; Sevilla-Hurtado, Lorenzo (Elsevier, 2024)
This work presents the use of a shallow feedforward artificial neural network (ANN) to develop a prediction model for geometrical deviations in the dry turning of the AA7075 (Al-Zn) alloy. The study focuses on the influence ... -
Surface Quality and Free Energy Evaluation of s275 Steel by Shot Blasting, Abrasive Water Jet Texturing and Laser Surface Texturing.
Bañón-García, Fermín; Sambruno, Alejandro; Batista, Moisés; Simonet, Bartolomé; Salguero, Jorge (MDPI, 2020-02-22)
Surface modification by different technologies prior to joining operations or improving tribological properties is a point of great interest. Improving surface activation by increasing the roughness of the metal is a ... -
Design and Analysis of CFRP Drilling by Electrical Discharge Machining
Roldán-Jiménez, Luis; Bañón-García, Fermín; Valerga, Ana Pilar; Fernández-Vidal, Severo Raúl (MDPI, 2022-03-25)
The novelty of EDM machining as a drilling operation for composite materials means that there is no consensus on the influence of the parameters that optimise the final quality. For these reasons, a characterisation of the ... -
Evaluation of geometrical defects in AWJM process of a hybrid CFRTP/ Steel structure
Bañón-García, Fermín; Sambruno, Alejandro; Batista, Moisés; Simonet, Bartolomé; Salguero, Jorge (Elsevier, 2021-08-18)
The bonding of Carbon Fibre Reinforced ThermoPlastic composites (CFRTP) and steel is of great interest nowadays. Nevertheless, the difference in machinability between dissimilar materials requires a specific machining ... -
On the Surface Quality of CFRTP/Steel Hybrid Structures Machined by AWJM
Bañón-García, Fermín; Simonet, Bartolomé; Sambruno, Alejandro; Batista, Moisés; Salguero, Jorge (MDPI, 2020-07-21)
The joining of dissimilar materials in a hybrid structure is a line of research of great interest at present. Nevertheless, the machining of materials with different machinability requires specific processes capable of ... -
Metallic cutting inserts fabrication by means of additive manufacturing with fused filament fabrication technology
Martín-Fernández, Francisco de Sales; Martín-Sánchez, María Jesús; Guerrero-Vacas, Guillermo Rafael; Rodríguez Alabanda, Óscar (Elsevier, 2024)
The present work developed a first approach to the manufacturing of turning inserts using the emerging Additive Manufacturing (AM) technology, specifically employing the fused filament fabrication (FFF) process, based on ... -
Characterisation of 18Ni 300 steel CT specimens in a fatigue test manufactured by selective laser melting at 0°, 45° and 90°
Moreno Cerezo, Pablo; Sánchez-Cruces, Manuel Alejandro; Moore, Steven; Wheatley, Greg; López-Crespo, Pablo (Elsevier, 2024)
Maraging steel, 18Ni300, is a high-performance material that shows promising potential for various industrial applications. Selective Laser Melting is utilized in the manufacturing of high-value components. Understanding ... -
Energy-based critical plane fatigue methods applied to additively manufactured 18Ni300 steel
Sánchez-Cruces, Manuel Alejandro; Branco, Ricardo; Borrego, L.P.; López-Crespo, Pablo (Elsevier, 2023-01-30)
En este trabajo, se estudió el comportamiento a fatiga uniaxial y biaxial del acero maraging (18Ni300) obtenido mediante fabricación aditiva. El material fue evaluado utilizando varios trayectos de carga biaxial y diferentes ... -
Critical plane based method for multiaxial fatigue analysis of 316 stainless steel
Sánchez-Cruces, Manuel Alejandro; García-González, Antonio Luis; Moreno-Morales, María Belén; Itoh, Takamoto; López-Crespo, Pablo (Elsevier, 2022-01-31)
In this work, the fatigue behaviour of 316 stainless steel is studied with different critical plane models. Seven cylindrical samples were used for the study, being subjected to different complex loading paths, generating ... -
Investigation of the multiaxial fatigue behaviour of 316 stainless steel based on critical plane method.
Sánchez-Cruces, Manuel Alejandro; López-Crespo, Pablo; Bressan, Stefano; Itoh, Takamoto (Wiley, 2019-03-19)
In this work the multiaxial behaviour of 316 stainless steel is studied under the lens of critical plane approach. A series of experiments were developed on dog bone shaped hollow cylindrical specimens made of type 316 ... -
Study of the notch fatigue behaviour under biaxial conditions of maraging steel produced by selective laser melting.
Sánchez-Cruces, Manuel Alejandro; Exposito, Alfonso; Branco, Ricardo; Borrego, L.P.; Antunes, Fernando Ventura; López-Crespo, Pablo[et al.] (Elsevier, 2022-07-05)
The current work aims to characterise the fatigue behaviour of an additively manufactured maraging steel, AISI 18Ni300. This is a class of high-strength steel widely used in biomedical, aircraft, aerospace, offshore, and ... -
Control of geometry and stability of tensegrities in the Octahedron and X-Octahedron families
Carbonell-Márquez, Juan Francisco; Fernández Ruiz, Manuel Alejandro; Hernández-Montes, Enrique; Gil-Martín, Luisa María (Elsevier, 2024)
Tensegrity structures obtained from the same connectivity patterns are said to belong to families. The Octahedron and X-Octahedron families are examples of these. In the literature, little attention has been paid to how ... -
Multiaxial Fatigue Life Prediction on S355 Structural and Offshore Steel Using the SKS Critical Plane Model.
Sánchez-Cruces, Manuel Alejandro; López-Crespo, Pablo; Moreno-Morales, María Belén; Antunes, Fernando Ventura; Antunes, Fernando Ventura (MDPI, 2018-12-13)
This work analyses the prediction capabilities of a recently developed critical plane model, called the SKS method. The study uses multiaxial fatigue data for S355-J2G3 steel, with in-phase and 90◦ out-of-phase sinusoidal ... -
Study of the biaxial fatigue behaviour and overloads on S355 low carbon steel
Sánchez-Cruces, Manuel Alejandro; Mokhtarishirazabad, Mehdi; Moreno-Morales, María Belén; Zanganeh, M; López-Crespo, Pablo (Elsevier, 2020-01-02)
This work aimed to study the fatigue behaviour of S355 low carbon steel under uniaxial and biaxial loading conditions and to measure the overload effects under both types of loads. The analysis is performed with a ... -
Influence of steel slag type on concrete shrinkage.
Rubio Cintas, María Dolores; Parrón-Rubio, María Eugenia; Pérez-García, Francisca; Ribeiro, António Bettencourt; Oliveira, Miguel José (MDPI, 2020-12-28)
Building construction and building operations have a massive direct and indirect effect on the environment. Cement-based materials will remain essential to supply the growth of our built environment. Without preventive ... -
Study of the suitability of different types of slag and its influence on the quality of green grouts obtained by partial replacement of cement
Pérez-García, Francisca; Parrón-Rubio, María Eugenia; García-Manrique-Ocaña, José Manuel; Rubio Cintas, María Dolores (MDPI, 2019)
This paper is part of a research line focused on the reduction of the use of cement in the industry. In this work, the study of work methodologies for the manufacture of green cementitious grout mixtures is studied. Grout ... -
Concrete properties comparison when substituting a 25% cement with slag from different provenances
Parrón-Rubio, María Eugenia; Pérez-García, Francisca; González-Herrera, Antonio; Rubio Cintas, María Dolores (MDPI, 2018)
Concrete consumption greatly exceeds the use of any other material in engineering. This is due to its good properties as a construction material and the availability of its components. Nevertheless, the present worldwide ... -
Fabrication of cutting inserts with chromium-molybdenum steel for turning operations using material extrusion technology.
Rodríguez Alabanda, Óscar; Guerrero-Vacas, Guillermo Rafael; Martín-Sánchez, María Jesús; Martín-Fernández, Francisco de Sales (Elsevier, 2024)
In this study, cutting inserts for turning were produced using metal 3D printing’s material extrusion technology. The primary focus was on optimizing cutting parameters. An experimental plan was devised involving rounds ... -
Impact properties of an end of life tires’ rubber. Numerical validation considering large strain and strain rate conditions
González Vega, Joaquín; Castillo-López, Germán; García-Sánchez, Felipe (Elsevier, 2024-07-10)
The objective of the authors is to demonstrate that the inclusion of renewed rubber from recycled end of life tires (ELT) can improve the performance of any structural system designed to dissipate impact energy. An interesting ... -
Fracture in stretch flanging by single point incremental forming.
(Elsevier, 2024)This study presents a comprehensive investigation of fracture in open-stretched flanges formed using Single Point Incremental Forming (SPIF) on AA2024-T3 aluminium sheets. The work systematically explores the impact of ...