Listar IMTF - Artículos por título
Mostrando ítems 1-18 de 18
-
A study of tensile and bending properties of 3D-printed biocompatible materials used in dental appliances
(Springer, 2022-01-03)In the last years, a large number of new biocompatible materials for 3D printers have emerged. Due to their recent appearance and rapid growth, there is little information about their mechanical properties. The design and ... -
Advances in Intelligent Vehicle Control
(IOAP-MPDI, 2022-11-09)Advanced intelligent vehicle control systems have evolved in the last few decades thanks to the use of artificial-intelligence-based techniques, the appearance of new sensors, and the development of technology necessary ... -
Analytical results for the propulsion performance of a flexible foil with prescribed pitching and heaving motions and passive small deflection
(Cambridge, 2021-01-28)The propulsive performance of a flexible foil with prescribed pitching and heaving motions about any pivot point location and passive chordwise flexural deflection is analysed within the framework of the linear potential ... -
Domestic hot water production system in a hospital: Energy audit and evaluation of measures to boost the solar contribution
(Elsevier, 2022-12-15)Hospitals consume large quantities of energy to produce hot water and offset the distribution and recirculation thermal losses. This paper analyses a solar thermal system combined with gas boilers for domestic hot water ... -
Experimental characterization of the thermal performance of the Haines 2 solar cooker
(Elsevier, 2022-10-15)This work presents the most exhaustive experimental characterization of the thermal performance of the Haines 2 solar cooker available to date. Two Haines 2 solar cookers were tested side-by-side in Malaga, Spain, 36.7°N, ... -
Flutter stability analysis of an elastically supported flexible foil. Application to the energy harvesting of a fully-passive flexible flapping-foil of small amplitude
(Elsevier, 2022-02)The aerodynamic forces on an oscillating flexible foil are used to study the flutter instability when the flexible foil is elastically mounted to translational and torsional springs and dampers at an arbitrary pivot axis. ... -
Global stability analysis of the natural convection between two horizontal concentric cylinders
(ELSEVIER, 2021-06)In this investigation, the 2D flow between two horizontally positioned concentric cylinders (gravity per- pendicular to the axis of the cylinders), where the inner cylinder is kept at constant temperature Ti higher than ... -
Higher order dynamic mode decomposition of an experimental trailing vortex
(AIP, 2022-10-27)The decay of trailing vortices is a fundamental problem in fluid mechanics and constitutes the basis of control applications that intend to alleviate the wake hazard. In order to progress, we use the recently developed ... -
Influence of Loading Conditions on the Mechanical Performance of Multifilament Coreless UHMWPE Sutures Used in Orthopaedic Surgery
(IOAP-MPDI, 2022-03-31)This work studies the influence of loading velocity and previous cyclic loading history on the stiffness and strength of a multifilament coreless ultra-high-molecular-weight polyethylene (UHMWPE) surgical suture. Thread ... -
Modeling of the Influence of Operational Parameters on Tire Lateral Dynamics
(IOAP-MPDI, 2022-08-24)Tires play a critical role in vehicle safety. Proper modeling of tire–road interaction is essential for optimal performance of active safety systems. This work studies the influence of temperature, longitudinal vehicle ... -
Modeling the external flow of a novel HorseShoe receiver and the evaluation of thermal performance
(Elsevier, 2022-10)The linear receiver of a Parabolic Trough Collector is the most critical element in the entire system. The Universal Vacuum Air Collector concept is the most extended type of receiver in both experimental and industrial ... -
Non-intrusive determination of shock absorber characteristic curves by means of evolutionary algorithms
(Elsevier, 2023-01-01)The fault detection in the components of the suspension system of road vehicles is of great importance. The optimal performance of the suspension system has a big influence on the safety and stability of a vehicle. Vehicle ... -
Numerical validation of simple non-stationary models for self-propelled pitching foils
(Elsevier, 2022-09-15)High-resolution numerical simulations of the self propelled locomotion of two-dimensional pitching foils are used to assess simplified models based on linear potential theory for the fluid-foil interaction. These models are ... -
On the feasibility of a flexible foil with passive heave to extract energy from low wind speeds
(Elsevier, 2022-10)We explore numerically and theoretically the capability of flexible foils elastically mounted to translational springs and dampers at the leading edge to extract energy from low-speed winds through its passive heave ... -
Propulsion enhancement of flexible plunging foils: Comparing linear theory predictions with high-fidelity CFD results
(ELSEVIER, 2021-09-01)The fluid–structure interaction of a flexible plunging hydrofoil immersed in a current is solved numerically to analyze its propulsion enhancement due to flexibility at Reynolds number 10 000. After validating with ... -
Simplified Model for Forward-Flight Transitions of a Bio-Inspired Unmanned Aerial Vehicle
(2022-10-18)A new forward-flight model for bird-like ornithopters is presented. The flight dynamics model uses results from potential, unsteady aerodynamics to characterize the forces generated by the flapping wings, including the ... -
Simplified Model for Forward-Flight Transitions of a Bio-Inspired Unmanned Aerial Vehicle
(IOAP-MPDI, 2022-10-18)A new forward-flight model for bird-like ornithopters is presented. The flight dynamics model uses results from potential, unsteady aerodynamics to characterize the forces generated by the flapping wings, including the ...