ListarQICM - Artículos por tema "Pilas de combustible"
Mostrando ítems 1-17 de 17
-
A novel multilaminated composite cathode for solid oxide fuel cells.
(Elsevier, 2019-05-28)A novel electrode architecture consisting in alternating layers of La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) and Ce0.9Gd0.1O1.95 (CGO) is prepared for the first time by spray-pyrolysis deposition and investigated as cathode material ... -
A review on recent advances and trends in symmetrical electrodes for solid oxide cells.
(Elsevier, 2021-12-04)Symmetrical solid oxide cells (SSOCs) with identical air and fuel electrodes have gained significant scientific interest in the last decade because they offer several advantages over conventional cell configurations. ... -
Durability and performance of CGO barriers and LSCF cathode deposited by spray-pyrolysis
(Elsevier, 2018-03-19)Ce0.9Gd0.1O1.95 (CGO) protective layers are prepared by two different methods to prevent the reaction between the Zr0.84Y0.16O1.92 (YSZ) electrolyte and the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) cathode. In the first method, ... -
Efficient symmetrical electrodes based on LaCrO3 via microstructural engineering.
(Elsevier, 2021-09-30)Novel nanostructured electrodes, La0.98Cr0.75B0.25O3δ (B = Mn, Fe, Ti and Cu), are prepared by a single spraypyrolysis deposition method directly on the electrolyte and a porous Ce0.9Gd0.1O1.95 (CGO) scaffold. ... -
High-Throughput Synthesis of Pillared-Layered Magnesium Tetraphosphonate Coordination Polymers: Framework Interconversions and Proton Conductivity Studies
(MDPI, www.mdpi.com/journal/inorganics, 2018-09-11)Novel pillared-layered framework materials were synthesized by high-throughput or microwave-assisted methodology that contain Mg2+ and the zwitterionic linker HDTMP (hexamethylenediamine-N,N,N0,N0-tetrakis(methylenephosphonic ... -
Highly efficient La0.8Sr0.2MnO3-δ - Ce0.9Gd0.1O1.95 nanocomposite cathodes for solid oxide fuel cells
(Elsevier, 2017-12-15)La0.8Sr0.2MnO3-δ-Ce0.9Gd0.1O1.95 (LSM-CGO) nanostructured cathodes are successfully prepared in a single process by a chemical spray-pyrolysis deposition method. The cathode is composed of nanometric particles of approximately ... -
Highly oriented and fully dense CGO films prepared by spray-pyrolysis and different precursor salts.
(Elsevier, 2020-03-19)CeO2–based thin films are prepared by spray-pyrolysis deposition from different aqueous precursor solutions containing nitrate, chloride or acetate salts. The morphology and orientation growth strongly depends on the precursor ... -
Influence of Bi1.5Y0.5O3 Active Layer on the Performance of Nanostructured La0.8Sr0.2MnO3 Cathode.
(MDPI, 2020-09-01)The efficiency of solid oxide fuel cell cathodes can be improved by microstructural optimization and using active layers, such as doped bismuth oxides. In this work, Bi1.5Y0.5O3 (BYO) films are prepared by spray-pyrolysis ... -
Investigation of PO4 3- oxyanion-doping on the properties of CaFe0.4Ti0.6O3 d for potential application as symmetrical electrodes for SOFCs
(Elsevier, 2020)CaTi0.6-xFe0.4PxO3-d (0 x 0.075) perovskite series are investigated as potential symmetrical electrodes for SOFCs. Pure phase compounds with a cubic perovskite structure (s.g. Pm3m) are obtained for x 0.025, while ... -
Layered Lanthanide Sulfophosphonates and Their Proton Conduction Properties in Membrane Electrode Assemblies
(ACS publications, 2019-11-07)Metal phosphonates containing acidic groups exhibit a wide range of proton conduction properties, which may enhance the performance of membrane electrode assemblies (MEAs). In this work, focus is placed on proton conduction ... -
LSCF-CGO nanocomposite cathodes deposited in a single step by spraypyrolysis.
(Elsevier, 2018-01-01)La0.6Sr0.4Co0.2Fe0.8O3-δ-Ce0.9Gd0.1O1.95 (LSCF-CGO) nanostructured cathodes with different LSCF-content are prepared in a single step by spray-pyrolysis deposition, simplifying notably the fabrication process compared ... -
New directions in metal phosphonate and fhosphinate chemistry
(MDPI www.mdpi.com/journal/crystals, 2019-05-24)In September 2018, the First EuropeanWorkshop on Metal Phosphonates Chemistry brought together some prominent researchers in the field of metal phosphonates and phosphinates with the aim of discussing past and current ... -
Perspectives on Cathodes for Protonic Ceramic Fuel Cells.
(MDPI, 2021-06-09)Protonic ceramic fuel cells (PCFCs) are promising electrochemical devices for the efficient and clean conversion of hydrogen and low hydrocarbons into electrical energy. Their intermediate operation temperature (500–800 ... -
Recent progress in nanostructured electrodes for solid oxide fuel cells deposited by spray pyrolysis.
(Elsevier, 2021-07-21)Low-temperature solid oxide fuel cells (LT-SOFCs), operating below 650 ◦C, are attracting a great interest due to their long-term stability and potential application for stationary and portable power generation. Much ... -
Relationship between the Structure and Transport Properties in the Ce1−xLaxO2−x/2 System
(American Chemical Society, 2019-06-25)La-doped CeO2 materials have been widely investigated for potential applications in different high-temperature electrochemical devices, such as fuel cells and ceramic membranes for hydrogen production. However, the crystal ... -
Stability and electrochemical performance of nanostructured La2CuO4þd cathodes
(Elsevier, 2019-02-21)La2CuO4þd cathode layers are prepared by spray-pyrolysis deposition and their structural, microstructural and electrical properties are compared with those of submicrometric powders obtained from freeze-dried precursors. ... -
Zinc(II), cobalt(II) and manganese(II) networks with phosphoserine ligand: Synthesis, crystal structures magnetic and conduction properties
(The Royal Society of Chemistry, 2017)A series of zinc(II), cobalt(II) and manganese(II) coordination networks with the phosphoserine ligand (Pser) is synthesized and characterized. Whereas in compounds 1 and 2 with the general formula [M(Pser)]n [M = Zn (1) ...