ListarQICM - Artículos por tema "Rietveld analysis"
Mostrando ítems 1-10 de 10
-
Belite clinkers with increasing aluminium content: effect of calcium aluminates on calcium silicate hydration
(Elsevier, 2022)Belite cements (BCs) could have advantages over Portland cements concerning durability, low heat development and the use of less demanding raw materials. The activation of BCs by sulfur addition at the clinkering stage and ... -
C-S-H seeding activation of Portland and Belite cements: An enlightening in situ synchrotron powder diffraction study
(Elsevier, 2022-11)C-S-H seeding in Portland cements is well known from basic scientific works and field applications. Moreover, this activation approach could be beneficial for low-CO2 cements under development where a general drawback is ... -
Early hydration of belite-ye’elimite-ferrite cements: Role of admixtures
(sciencedirect, 2023)The effect of TIPA and CaCl2 on early hydration, i.e. 24 h, of a B-BYF cement has been studied by in situ synchrotron X-ray powder diffraction, calorimetry, thermal analysis, NMR, and rheological measurements of the pastes ... -
In situ synchrotron powder diffraction study of LC3 cement activation at very early ages by C-S-H nucleation seeding.
(Elsevier, 2024-02-22)Limestone Calcined Clay Cements, LC3, are being widely researched as low-carbon binders. However, the hydration reactions during the first day are key for their performances and they were not well known. Here, we employ ... -
Influence of curing temperature on belite cement hydration: a comparative study with Portland cement
(Elsevier, 2021-05-24)Belite cements (BCs) could be a more sustainable binder than Portland cements (PCs) but adequate knowledge of the hydration features has still to be built. In particular, the mild curing hydration temperature effects have ... -
Limestone calcined clay binders based on a Belite-rich cement
(Elsevier, 2023)Portland-based Limestone Calcined Clay Cements, LC3, are receiving considerable attention because the CO2 footprint can be reduced up to 40 %. Here, we report a related family: Belite-rich-LC3. These blends are expected ... -
Mix and measure - Combining in situ X-ray powder diffraction and microtomography for accurate hydrating cement studies.
(Elsevier, 2023-11-14)It is reported an innovative methodology based on in situ MoKα1 laboratory X-ray powder diffraction (LXRPD) and microtomography (μCT) avoiding any sample conditioning. The pastes are injected in 2.0 mm capillaries and the ... -
Phase and microstructure evolutions in LC3 binders by multi-technique approach including synchrotron microtomography
(Elsevier, 2021-06-19)Limestone Calcined Clay Cements, LC3, are attracting a lot of attention as it is possible to reduce the clinker factor by 50%, which means a cement CO2 footprint reduction of 40%. This is compatible with maintaining the ... -
Portland and belite cement hydration acceleration by C-S-H seeds with variable w/c ratios
(Materials, 2022)The acceleration of very early age cement hydration by C-S-H seeding is getting attention from scholars and field applications because the enhanced early age features do not compromise later age performances. This acceleration ... -
Portland and Belite Cement Hydration Acceleration by C-S-H Seeds with Variable w/c Ratios
(IOAP-MPDI, 2002-05-16)The acceleration of very early age cement hydration by C-S-H seeding is getting attention from scholars and field applications because the enhanced early age features do not compromise later age performances. This acceleration ...